|
|
|
Service Temp: | -50 to +200°C | |
Max Load: | 35 MPa |
Tolerance Control: | +/- 25 μm
?
The given value is the minimum tolerance reachable on diameter and cross section based on seal design < 10 mm in outer diameter. Other value are available on demand for any larger seals dimension. | |
Capacity: | >50 M/yr | |
Defects Program: | 0 ppm |
Injection molding: | φ=[2;200]mm |
You can add the following Options on your product.
Thermal expansion reduction | |
Load resistance | |
Low coefficient of friction | |
Wear resistance | |
Extreme wear resistance |