|
|
|
Service Temp: | -200 to +290 °C | |
Max Load: | 70 MPa |
Tolerance Control: | +/- 40 μm
?
The given value is the minimum tolerance reachable on diameter and cross section based on seal design < 10 mm in outer diameter. Other value are available on demand for any larger seals dimension. | |
Capacity: | >4 M/yr | |
Defects Program: | 0 ppm |
Injection molding: | φ=[2;200]mm |
You can add the following Options on your product.
+ | Thermal Expansion Reduction |
+ | Load Resistance |
+ | Low Coefficient of Friction |
+ | Wear Resistance |
++ | Extreme Wear Resistance |