|
|
|
Service Temp: | -50 to +150 °C | |
Max Load: | 25 MPa |
Tolerance Control: | +/- 30 μm
?
The given value is the minimum tolerance reachable on diameter and cross section based on seal design < 10 mm in outer diameter. Other value are available on demand for any larger seals dimension. | |
Capacity: | >20 M/yr | |
Defects Program: | 0 ppm |
Injection molding: | φ=[2;200]mm |
You can add the following Options on your product.
+ | Thermal expansion reduction |
+ | Load resistance |
+ | Low coefficient of friction |
+ | Wear resistance |
++ | Extreme wear resistance |