Service Temp: | -100 to +260 °C | |
Max Load: | 50 MPa |
Tolerance Control: | +/- 20 μm
?
The given value is the minimum tolerance reachable on diameter and cross section based on seal design < 10 mm in outer diameter. Other value are available on demand for any larger seals dimension. | |
Capacity: | >50 M/yr | |
Defects Program: | 0 ppm |
Injection molding: | φ=[2;200]mm |
You can add the following Options on your product.
+ | Thermal expansion reduction |
+ | Load resistance |
++ | Low coefficient of friction |
+ | Wear resistance |
++ | Extreme wear resistance |