You are here
OmniSeal® 60 Rotary Lip Seals
BEST Rotary Lip Seal solution in sealing for high run out application.
-
OmniSeal® Rotary Lip Seals Handbook:
| Polymer material lip
?
Polymer material lip are typically are made up of molded and precision machined from high performance polymers as PTFE, filled PTFE composites, and other thermoplastics. In contact with the sealing counterface, the lip design and tribology respectively define the leak rate and the wear rate. | ||
| Metal casing
?
Metal (or plastic) casing is design to hold the polymeric lip material in position to make an effective contact with the sealing counterface. The material used for the casing also administers chemical compatibility and ease of installation. |
| Temperature: | -50 to +200 °C | |
| Pressure: | 0 to 0.5 MPa | |
| Max Speed: | 10 m/s |
| Specifics: | Spring loaded | |
| Max PV (lub/dry): | 2.5/1.5 Mpa.m/s
?
The given value is the recommended PV value the sealing material can withstand under standard conditions of use. |
| Diameter: | 10 to 200 mm | |
| Shaft Tolerances: | +/- 15 µm |
