You are here
Rulon® J PTFE
Polymer Filled material solution used for low friction, soft shaft and extreme cold temperature.
The wear and friction control material is ideal for high-speed, low-load applications as it has one of the lowest coefficients of friction among commercially availabled blended PTFE materials. Typical critical parts include: Industrial arm wear pads (production compressors), Consumer glide rings (bicycle suspension systems) and mass transportation sliding elements (train bogies).
|
|
Material
| Gold fluoropolymer
?
Material is molded and precision machined from high performance polymers as PTFE and filled PTFE composites specifically designed to administers advanced properties and performance. The formulation control wear and friction properties for specific application and environment. | > | |
| Engineered polymer filled |
Service Conditions
| Temperature: | -269 to +315 °C | > |
| Max load (dry): | 5.5 MPa | |
| Max Speed: | 2 m/s |
Feature
| Friction coefficient: | 0.12 to 0.20 | |
| Max PV (dry/lub): | 0.26 MPa.m/s |
Dimension
| Rods and Tubes: | (φ) 1.2m x (L) 3m | > |
| Sheets: | (L,W) 610 mm x (T) 80 mm | |
| Tapes: | (W) 1m x (T)=[0.08;6] mm |
- Superior dry friction
- Stick/slip elimination
- Hardware abrasion reduction
- Minimal moisture absorption
- Dimensional stability in all chemicals
